Northern wing of the estate.
A stone-paved path leads to Morezmore Studio.
Inside you find:
Humanly Posable Armature
HPA-M3 CAVE EXPLORER Humanly Posable Armature HARDWARE Puppet Kit for an articulated doll or stop motion puppet
Includes Hardware Only.
Height - 12" (30.5 cm)
Humanly Posable Armature General Info and Instructions
For successful completion of your armature, you will need these tools (see the photo just below). THIS KIT DOES NOT INCLUDE THESE TOOLS.
If you don't have these necessary tools, please consider Starter Kit (C00005), which includes both this kit and all the tools.
You can also purchase all tools and additional hardware parts SEPARATELY
What is included:
|M3x8mm threaded balls (half thread)||8|
|M3x6mm threaded balls (full thread)||20|
|M3 chest bar||1|
|1/8" Jeton inch||2|
|3/32" Jeton inch||2|
|M2x5mm brass connectors||4|
|35 mm nylon standoff||2|
|20 mm nylon standoff||6|
|1/8″x30mm square brass tubes||3|
|5/32″x30mm square brass tubes||4|
|1/8″x15mm square brass tubes||1|
|M3x16mm threaded rods||24|
|M2x10mm brass connectors||10|
|10 mm nylon standoff||2|
|joint compression plates||28|
|M3 hex nuts||17|
|M2x10mm button hex screws||14|
|M3x10mm threaded rods||8|
|M3x20mm threaded rods||1|
|L-shaped threaded rod M3*80||2|
|2 pieces M3 wing nuts||2|
|1 piece of allen hex key (for assembly)||1|
|1 oz of Instamorph moldable thermoplastic||1|
|clear plastic 10-compartment boxes to hold the small parts||2|
All parts, tools and materials can be purchased SEPARATELY.