M00028 MOREZMORE Try Instamorph 1 oz Moldable Plastic Thermoplastic Pellets

Was: $2.51
Now: $2.38
(No reviews yet) Write a Review
SKU:
M00028
Northern wing of the estate.
A stone-paved path leads to Morezmore Studio.
Inside you find:

Try Instamorph Moldable Plastic
Thermoplastic Pellets
1 oz

InstaMorph is a lightweight thermoplastic which acts like clay when warm, but when it cools, It's a strong plastic.

Instructions

1.Heat some water to approximate 150 degrees F. Water can easily be heated on a stove top or in a microwave oven. (You can also also heat InstaMorph using hot air from a heat gun or oven. The InstaMorph pellets must reach the same activation temperature. Once achieved, you can skip to step 5).

2.Pour InstaMorph pellets into the water. Do not worry if it is not enough to finish your project, you can always add more InstaMorph later.

3.Wait approximately two minutes or until white InstaMorph pellets turn clear and stick together. This is when you'sll know they are ready to mold. If they haven'st turned clear, try increasing the heat just a little bit.

4.Remove from the water and get rid of any remaining liquid between the pellets. Be sure to use tongs or some other type of tool (not your hands) as your InstaMorph will still be quite hot.

5.Once removed from water, InstaMorph will be cool enough to mold by hand. Form into desired shape with your hands, tools, molds, or any other means necessary.

6.Once you'sve got your InstaMorph creation finalized, let it cool to room temperature. You can place InstaMorph in ice water to speed up the setting process. Once completely cooled, InstaMorph will then be as solid and strong as before it was heated.
[]