Northern wing of the estate.
A stone-paved path leads to Morezmore Studio.
Inside you find:
Humanly Posable Armature (HPA) Parts
J-B Weld 8265S Cold Weld
Steel Reinforced Epoxy Epoxy Welding Compound
2-part Epoxy
J-B Weld is proudly made in the USA
Humanly Posable Armature General Info and Instructions
A stone-paved path leads to Morezmore Studio.
Inside you find:
Humanly Posable Armature (HPA) Parts
J-B Weld 8265S Cold Weld
Steel Reinforced Epoxy Epoxy Welding Compound
2-part Epoxy
J-B Weld is proudly made in the USA
Humanly Posable Armature General Info and Instructions
- Includes 1 fl. oz. of steel-reinforced epoxy and 1 fl. oz. of hardener
- Easy to use, cures to dark gray.
- Use on automotive, brick, concrete, metal
- Will set in 4-6 hours, and cure in 16-24 hours
- Strong and nontoxic after it has set.
- Temperature resistant up to 500F
- Tensile strength is 3,960 PSI
- Waterproof, petroleum, chemical, and acid resistant when fully cured
- Can be drilled, tapped, machined, filed, sanded and painted
J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 3960 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.
Use on:
Automotive
Brick
Concrete
Epoxy and Adhesives
Fiberglass
Metal
And more
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
2. Mix: Squeeze equal parts from each tube onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 4-6 hours. Cures in 15-24 hours. Allow 4-6 hours before handling and 15 hours (minimum) before putting object back in use.
